Home  |  About Us  |  Services  |  Sign Up  |  Support  |  Downloads    

 

Support

Eudora 5 E-Mail Setup

To setup Eudora 5 for Mac to send and receive e-mail, follow these steps:

You will need the following information in order to setup an account.
E-mail Address: (similar to "name@evcohs.com")
User Name: (usually the part before the @ sign)
Password: (the password for your mail account)
Incoming Mail Server: ( "evcohs.com") for your EvCo. mail
Outgoing Mail Server-SMTP: ("evcohs.com" for your EvCo mail)

1 - Go to the 'Special' menu and select 'Settings'
2 - In the left column of the settings, select the 'Getting Started' icon
3 - Fill in the right information fields:

Checking mail

  • Username - This is the part of your e-mail address to the left of the '@' sign. For instance, janeandjohn@evcohs.com has a username of 'janeandjohn'.
  • Mail Server - This is the incoming (POP) mail server for your account (for EvCo mail it is "evcohs.com")

Sending mail

  • Real Name - This is the name people will see when you send them an e-mail address. I can be any name or nickname you like.
  • SMTP Server - This is the server used to send mail (for EvCo mail it is "evcohs.com")
  • Return Address - Enter your e-mail address in this field

4 - Click OK and the setup of Eudora is complete.

To setup multiple e-mail addresses (Personalities) in Eudora:
1 - In the settings window, scroll down to the 'Personalities' icon found in the left navigation panel.
2 - Click the 'New' button.
3 - In the 'Personality Name' field, type in the new e-mail address.
4 - Under 'Checking Mail', in the 'Username' field, enter the part of the address to the left of the '@' sign. For instance, janedoe@estreet.com has a username of 'jandoe'.
5 - Enter the 'Mail Server' for your account. This is the incoming or POP server.
6 - Make sure the 'Check mail on manual checks' is checked if you want to receive mail for this account when you check mail for your main account.
7 - Under the Sending Mail section, enter your 'Real name'.
8 - In the 'SMTP Server' field, enter the outgoing or SMTP server for your account.
9 - Click OK to save the settings.

Copyright © 2005 EvCo Hi Speed LLC. All rights reserved.